DRV8825 Stepper Motor Driver - 4 pcs

The DRV8825 is a very powerful Stepper Motor Driver for your 3D Printer Controller. This Stepper Motor Driver can handle up to 2.5A of motor current and runs much cooler than the A4988 Stepper Motor Drivers.

The DVR8825 is very suitable for demanding 3D Printer Controller operations.

High current driver capable up to 2.5A
4-layer PCB, better thermal performance.
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Protection against over-temperature and over-current
No logic voltage required


DVR8825 Stepper Motor Drivers can be used on a wide variety of 3D Printer Controller boards for powering your Prusa Mendel i2, MendelMax 1.5, Prusa i3, easyDelta, Kossel, Rostock or other 3D printers. Most common 3D printer controller boards:

RAMPS 1.4 3D Printer Controller Board
Sanguinololu 1.3A 3D Printer Controller Board
MKS Base V1.2 3D Printer Controller Board
RUMBA 3D Printer Controller Board

Technical Specs

Controller: DRV8825
Operating Voltage (logic): 3-5.25V
Operating Voltage (vmot): 12-24V
Max current: 2.5A
Dimensions: 20.4 x 15.6 mm

This product was added to our catalog on Thursday 18 August, 2016.