UHU Glue Stick 40 g

Making the objects you want to print stick to the glass plate is a challenge for everyone using a 3D printer. While using PET or KAPTON tape in combination with for example 'ABS juice' works fine it really is a hassle. You have to prepare the glass plate, put tape on the surface, apply the 'ABS juice' before you can even start your print job. The worst part has yet to come, when you've finished printing the objects are very hard to release. Blood shedding guaranteed!

We found that the UHU Glue stick, miracely, solves many of these rather frustrating issues. Objects not only stick tightly to the glass plate, you also get super smooth surfaces. Using tape on the contrary on top of the glass plate will always leave some air under the tape which will effect the smoothness of your object. A further great advantage of using the UHU Glue Stick is the fact that objects release themselves from the glass plate when the print job is done and the glass plate cools down. Simple as that & no more precious blood shed. 3D printing is fun again!


1. While the glass plate is still cold, apply a thin layer of glue using the UHU Stick on top of the glass plate. Let it dry for half a minute.
2. Heat-up your heated bed and start your print job.
3. When the print job is done, cool down the heated bed.
4. After minutes you will hear a cracking noise. Don't worry, this is good news as the objects are popping off the glass plate.

You do not need to re-apply the glue on every new print job you start. For orientation: after about 4-6 print jobs add a new thin layer of glue. Do not forget to thoroughly clean your glass plate once a while.

Technical Specs:

• UHU Glue Stick
• Amount: 40g


Payment information
Follow Us
1 x Herringbone gear set - ABS
1 x MK7 Drive Gear Shaft - 5 mm
1 x PTFE Tubing 3.18 inner / 6 outer diameter (10 cm)
1 x Groove Mount Plate for HotEnd - Aluminium
1 x Greg's Wade Reprap Extruder v5 for Prusa i3 - Assembled (ABS)
1 x Fan Mount for Prusa i3 Extruder + Fan
1 x PTFE Tubing 2 inner / 4 outer diameter (10 cm)
1 x Gregs Wade V3 JHead Extruder block - ABS
1 x Hobbed Bolt for RepRap 3D Printer
1 x Compression Spring for Reprap Extruder & Heated Bed - 1 piece
1 x Greg Extruder - Assembled- ABS
1 x Greg's Wade Reprap Extruder v5 for Prusa i3 (ABS)
1 x KISS 200 3D-Printer - Full DIY Kit
1 x Complete Extrusion set for the Mendel Max 1.5
1 x easyDelta Reprap 3D Printer Full Kit + 1730 Full Metal Hotend
1 x Prusa i3 Achatz Edition Full Frame Set
1 x Y-Carriage Plate for Heated Bed
1 x KISS 200 Extended 3D-Printer - Full DIY Kit
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 10 pcs
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 100 pcs
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 50 pcs
1 x Spool Holder for Prusa i2, Mendel Pro - ABS
1 x Standalone Spool Holder for Prusa i2, Prusa i3 & MendelMax 1.5
1 x Spool Circle for 3D Filament Spools (Spools with 5 / 5.9 cm ID)
1 x Spool Holder for MendelMax 1.5 - ABS
1 x Spool Circle for 3D Filament Spools (Spools with 3.1 cm ID)
1 x MendelMax 1.5 Reprap 3D Printer Frame Kit - Red - ABS
1 x Prusa Mendel i2 Reprap 3D Printer Frame Kit - Orange/White - ABS
1 x Prusa i3 Achatz Edition Reprap 3D Printer Frame Kit
1 x NEMA17 Stepper motor 1.8 degrees step / 4.8 kg/cm
1 x NEMA17 Stepper motor 0.9 degrees step / 4.2 kg/cm
1 x Fidget Spinner
1 x Anti-static, anti-magnetic Tweezer - ESD12
1 x KISS 200 Extended 3D-Printer Fully Assembled
1 x KISS 200 3D-Printer Fully Assembled
Shipping information
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Quick Find
Use keywords to find the product you are looking for.
Advanced Search

Export this product info to :   Printer Friendly   Export to Excel   Export to Word   Export to xml   Export to csv