BuildTak Printing Surface 203 mm x 203 mm

Ideal build surface for FFF 3D printers

Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.

BuildTak is a proprietary, patent-pending composition that comes in pre-cut, specially textured plastic sheets that adhere to your build platform with its heat-resistant adhesive backing.

Size: 203 mm x 203 mm (Square)

Key Features:
  • Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface
  • Installs much easier than masking tape or films typically used and with fewer chances of air bubbles
  • Protects build plate
  • Heat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface
  • Creates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.

Payment information
Follow Us
1 x Herringbone gear set - ABS
1 x MK7 Drive Gear Shaft - 5 mm
1 x PTFE Tubing 3.18 inner / 6 outer diameter (10 cm)
1 x Groove Mount Plate for HotEnd - Aluminium
1 x Greg's Wade Reprap Extruder v5 for Prusa i3 - Assembled (ABS)
1 x Fan Mount for Prusa i3 Extruder + Fan
1 x PTFE Tubing 2 inner / 4 outer diameter (10 cm)
1 x Gregs Wade V3 JHead Extruder block - ABS
1 x Hobbed Bolt for RepRap 3D Printer
1 x Compression Spring for Reprap Extruder & Heated Bed - 1 piece
1 x Greg Extruder - Assembled- ABS
1 x Greg's Wade Reprap Extruder v5 for Prusa i3 (ABS)
1 x KISS 200 3D-Printer - Full DIY Kit
1 x Complete Extrusion set for the Mendel Max 1.5
1 x easyDelta Reprap 3D Printer Full Kit + 1730 Full Metal Hotend
1 x Prusa i3 Achatz Edition Full Frame Set
1 x Y-Carriage Plate for Heated Bed
1 x KISS 200 Extended 3D-Printer - Full DIY Kit
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 10 pcs
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 100 pcs
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 50 pcs
1 x Spool Holder for Prusa i2, Mendel Pro - ABS
1 x Standalone Spool Holder for Prusa i2, Prusa i3 & MendelMax 1.5
1 x Spool Circle for 3D Filament Spools (Spools with 5 / 5.9 cm ID)
1 x Spool Holder for MendelMax 1.5 - ABS
1 x Spool Circle for 3D Filament Spools (Spools with 3.1 cm ID)
1 x MendelMax 1.5 Reprap 3D Printer Frame Kit - Red - ABS
1 x Prusa Mendel i2 Reprap 3D Printer Frame Kit - Orange/White - ABS
1 x Prusa i3 Achatz Edition Reprap 3D Printer Frame Kit
1 x NEMA17 Stepper motor 1.8 degrees step / 4.8 kg/cm
1 x NEMA17 Stepper motor 0.9 degrees step / 4.2 kg/cm
1 x Fidget Spinner
1 x Anti-static, anti-magnetic Tweezer - ESD12
1 x KISS 200 Extended 3D-Printer Fully Assembled
1 x KISS 200 3D-Printer Fully Assembled
Shipping information
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Quick Find
Use keywords to find the product you are looking for.
Advanced Search

Export this product info to :   Printer Friendly   Export to Excel   Export to Word   Export to xml   Export to csv