64.95€

ONYX (rev6) Ø 310 mm Heated Bed for Delta / Rostock 3D Printers
[1000000003352]

The ONYX (rev6) Round PCB Heated Bed is a high quality solution for adding a heated bed to your Delta / Rostock 3D Printer. The Heated bed prevents warping of your prints by improving the attachment of the filament to the build plate. Use of a fireproof glass plate with the ONYX (rev2) PCB Heated Bed is highly recommended to provide a truly flat surface and rigidity.

Tech Specs
  • Overall diameter: 310 mm
  • Heated Area: 280 mm
  • Designed for 12V operation, can be used with 24v with limiting the PWM signal etc.
  • 3 mm equaly spaced mounting holes (12x) on a 300 mm diameter pattern
  • Approximately 1.0-1.1 Ohms resistance @ room temperature
  • Thermistor location offset from the center of the bed for more average readings
  • Pads for thru hole OR SMT power LED and resistor to indicate bed AND hotend power
Reviews

Payment information
Follow Us
1 x Greg Extruder - Assembled- ABS
1 x PTFE Tubing 3.18 inner / 6 outer diameter (10 cm)
1 x MKS SBASE v1.3 (Smoothieware) 32 Bit 3D Printer Controller
2 x KISS 200 3D-Printer Fully Assembled
1 x Pre-installed Raptor 3D Scanner SD Card - Raspberry Pi 3 Model B
1 x BLTouch (Original) - Auto Bed Leveling Sensor | 3D Printer
1 x Type K Thermocouple (Welded Tip)
1 x MKS TFT 3.2" Touch Screen Controller Display for 3D Printer
2 x KISS 200 Extended 3D-Printer - Full DIY Kit
2 x KISS 200 3D-Printer - Full DIY Kit
2 x Fidget Spinner
2 x KISS 200 Extended 3D-Printer Fully Assembled
1 x Reprap Insulated Copper Wire (Green) 1-Core Cable (10 m)
1 x Reprap Insulated Copper Wire (Red) 1-Core Cable (10 m)
1 x Reprap Insulated Copper Wire Full Set (1-Core) Black, Blue, Red
1 x Reprap 4-Wire Cable | Red, Blue, Green & Black - 1 m
1 x Reprap Insulated Copper Wire (Black) 1-Core Cable (10 m)
1 x Reprap 2-Wire Cable | Red & Black - 1 m
1 x Reprap Full Wire Cable Set (9 wires)
1 x Reprap Insulated Copper Wire (Blue) 1-Core Cable (10 m)
1 x Reprap 3-Wire Cable | Red, Black & Yellow - 1 m
1 x USB 2.0 Cable 1.8 m
1 x Reprap Heater Wire 1 m
1 x Prusa i3 Achatz Edition Full Frame Set
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 100 pcs
1 x Complete Extrusion set for the Mendel Max 1.5
1 x Y-Carriage Plate for Heated Bed
1 x easyDelta Reprap 3D Printer Full Kit + 1730 Full Metal Hotend
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 10 pcs
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 50 pcs
1 x Spool Circle for 3D Filament Spools (Spools with 3.1 cm ID)
1 x Spool Circle for 3D Filament Spools (Spools with 5 / 5.9 cm ID)
1 x Standalone Spool Holder for Prusa i2, Prusa i3 & MendelMax 1.5
1 x Spool Holder for MendelMax 1.5 - ABS
1 x Spool Holder for Prusa i2, Mendel Pro - ABS
1 x Prusa Mendel i2 Reprap 3D Printer Frame Kit - Orange/White - ABS
1 x MendelMax 1.5 Reprap 3D Printer Frame Kit - Red - ABS
1 x Prusa i3 Achatz Edition Reprap 3D Printer Frame Kit
1 x NEMA17 Stepper motor 1.8 degrees step / 4.8 kg/cm
1 x NEMA17 Stepper motor 0.9 degrees step / 4.2 kg/cm
1 x Anti-static, anti-magnetic Tweezer - ESD12
11,904.94€
Currencies
Shipping information
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search

Export this product info to :   Printer Friendly   Export to Excel   Export to Word   Export to xml   Export to csv