The ONYX (rev6) Round PCB Heated Bed is a high quality solution for adding a heated bed to your Delta / Rostock 3D Printer. The Heated bed prevents warping of your prints by improving the attachment of the filament to the build plate. Use of a fireproof glass plate with the ONYX (rev2) PCB Heated Bed is highly recommended to provide a truly flat surface and rigidity.
- Overall diameter: 310 mm
- Heated Area: 280 mm
- Designed for 12V operation, can be used with 24v with limiting the PWM signal etc.
- 3 mm equaly spaced mounting holes (12x) on a 300 mm diameter pattern
- Approximately 1.0-1.1 Ohms resistance @ room temperature
- Thermistor location offset from the center of the bed for more average readings
- Pads for thru hole OR SMT power LED and resistor to indicate bed AND hotend power