29.85€

BuildTak Printing Surface Diameter 304 mm (Round)
[1000000004694]

Ideal build surface for FFF 3D printers

Having problems getting your 3D prints to stick? Ready to put away the blue tape, kapton, hairspray, ABS juice or other solutions? We have the answer! BuildTak is a thin, durable plastic sheet that adheres to the print bed of FFF (fused filament fabrication) 3D printers. It provides an optimal printing surface for 3D objects to adhere to for the duration of a print, while allowing for a clean, easy removal of completed builds.

BuildTak is a proprietary, patent-pending composition that comes in pre-cut, specially textured plastic sheets that adhere to your build platform with its heat-resistant adhesive backing.

Size: Diameter 304 mm (Round)

Key Features:
  • Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface
  • Installs much easier than masking tape or films typically used and with fewer chances of air bubbles
  • Protects build plate
  • Heat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface
  • Creates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.
Reviews

Payment information
Follow Us
1 x Greg Extruder - Assembled- ABS
1 x PTFE Tubing 3.18 inner / 6 outer diameter (10 cm)
1 x MKS SBASE v1.3 (Smoothieware) 32 Bit 3D Printer Controller
2 x KISS 200 3D-Printer Fully Assembled
1 x Pre-installed Raptor 3D Scanner SD Card - Raspberry Pi 3 Model B
1 x BLTouch (Original) - Auto Bed Leveling Sensor | 3D Printer
1 x Type K Thermocouple (Welded Tip)
1 x MKS TFT 3.2" Touch Screen Controller Display for 3D Printer
2 x KISS 200 Extended 3D-Printer - Full DIY Kit
2 x KISS 200 3D-Printer - Full DIY Kit
2 x Fidget Spinner
2 x KISS 200 Extended 3D-Printer Fully Assembled
1 x Reprap Insulated Copper Wire (Green) 1-Core Cable (10 m)
1 x Reprap Insulated Copper Wire (Red) 1-Core Cable (10 m)
1 x Reprap Insulated Copper Wire Full Set (1-Core) Black, Blue, Red
1 x Reprap 4-Wire Cable | Red, Blue, Green & Black - 1 m
1 x Reprap Insulated Copper Wire (Black) 1-Core Cable (10 m)
1 x Reprap 2-Wire Cable | Red & Black - 1 m
1 x Reprap Full Wire Cable Set (9 wires)
1 x Reprap Insulated Copper Wire (Blue) 1-Core Cable (10 m)
1 x Reprap 3-Wire Cable | Red, Black & Yellow - 1 m
1 x USB 2.0 Cable 1.8 m
1 x Reprap Heater Wire 1 m
1 x Prusa i3 Achatz Edition Full Frame Set
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 100 pcs
1 x Complete Extrusion set for the Mendel Max 1.5
1 x Y-Carriage Plate for Heated Bed
1 x easyDelta Reprap 3D Printer Full Kit + 1730 Full Metal Hotend
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 10 pcs
1 x T-Slot Nut for MendelMax 1.5 Misumi Extrusions - 50 pcs
1 x Spool Circle for 3D Filament Spools (Spools with 3.1 cm ID)
1 x Spool Circle for 3D Filament Spools (Spools with 5 / 5.9 cm ID)
1 x Standalone Spool Holder for Prusa i2, Prusa i3 & MendelMax 1.5
1 x Spool Holder for MendelMax 1.5 - ABS
1 x Spool Holder for Prusa i2, Mendel Pro - ABS
1 x Prusa Mendel i2 Reprap 3D Printer Frame Kit - Orange/White - ABS
1 x MendelMax 1.5 Reprap 3D Printer Frame Kit - Red - ABS
1 x Prusa i3 Achatz Edition Reprap 3D Printer Frame Kit
1 x NEMA17 Stepper motor 1.8 degrees step / 4.8 kg/cm
1 x NEMA17 Stepper motor 0.9 degrees step / 4.2 kg/cm
1 x Anti-static, anti-magnetic Tweezer - ESD12
11,904.94€
Currencies
Shipping information
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search

Export this product info to :   Printer Friendly   Export to Excel   Export to Word   Export to xml   Export to csv