19.85€

High Temperature Resistant PET Tape for ABS/PLA - 50 mm / 66 m
[1000000003239]

TESA's 50600 PET Tape is a green, high-temperature masking tape featuring a polyester backing with a silicone adhesive. Features and benefits include:

- Easy to apply
- High temperature resistance - up to 220°C / 428°F (30min.)
- One piece removal without leaving residues

Print surface

PET tape makes a good print surface for printing PLA & ABS. Apply thin layers of PET tape directly to the surface of the fireproof borosilicate glass plate on your Heated Bed. For ABS to stick to PET, the PET needs to be hot (temperatures between 80-130 °C). After the layers of PET tape are added to the glass plate we recommend to sand the PET tape using sandpaper. We also recommend to apply some 'ABS Juice' on the Kapton tape when the Heated Bed has reached temperature.

Advantages PET vs Kapton

ABS adheres to PET more reliable than to Kapton tape. PET tape delivers best results in combination with 'ABS Juice'.


Tech Specs
  • Material: PET
  • Heat Resistance: 220°C
  • Width: 50 mm
  • Length: 66 m
  • Thickness: 0.06 mm
Reviews

Payment information
Follow Us
1 x Reprap Insulated Copper Wire (Blue) 1-Core Cable (10 m)
1 x Type K Thermocouple (Welded Tip)
1 x USB 2.0 Cable 1.8 m
1 x KISS 200 3D-Printer - Full DIY Kit
1 x Pre-installed Raptor 3D Scanner SD Card - Raspberry Pi 3 Model B
1 x KISS 200 3D-Printer Fully Assembled
1 x Reprap Heater Wire 1 m
1 x Reprap Insulated Copper Wire (Red) 1-Core Cable (10 m)
1 x KISS 200 Extended 3D-Printer Fully Assembled
1 x Reprap Full Wire Cable Set (9 wires)
1 x Reprap Insulated Copper Wire (Green) 1-Core Cable (10 m)
1 x Reprap Insulated Copper Wire Full Set (1-Core) Black, Blue, Red
1 x BITMAIN Antminer S7 S9 D3 l3+ Adapter 120mm Fan to 100mm Duct
1 x Reprap Insulated Copper Wire (Black) 1-Core Cable (10 m)
1 x Reprap 3-Wire Cable | Red, Black & Yellow - 1 m
1 x KISS 200 Extended 3D-Printer - Full DIY Kit
1 x MKS SBASE v1.3 (Smoothieware) 32 Bit 3D Printer Controller
1 x MKS TFT 3.2" Touch Screen Controller Display for 3D Printer
1 x Reprap 2-Wire Cable | Red & Black - 1 m
1 x Reprap 4-Wire Cable | Red, Blue, Green & Black - 1 m
1 x 19 mm Bulldog Clips (4 pieces)
1 x Fireproof Glass plate 4 mm for Heated Print Bed MK2B
1 x BuildTak Printing Surface 254 mm x 254 mm
1 x TESA Blue Painter Tape for PLA - 38 mm / 25 m
1 x BuildTak Printing Surface 203 mm x 203 mm
1 x PCB Heatbed MK2B Dual Power 12/24V - Updated Version of MK2a
1 x Intenso 4 GB microSDHC Card + SD Adapter
1 x High Temperature Resistant PET Tape for ABS/PLA - 50 mm / 66 m
1 x 25 mm Bulldog Clips (4 pieces)
1 x Intenso 8 GB microSDHC Card + SD Adapter
1 x Ø 290 mm Fireproof Glass Plate for Delta / Rostock 3D Printers
1 x BuildTak Printing Surface Diameter 304 mm (Round)
1 x Compression Spring for Reprap Extruder & Heated Bed - 1 piece
1 x Ø 200 mm Fireproof Glass Plate for Delta / Rostock 3D Printers
1 x BuildTak Printing Surface Diameter 203 mm (Round)
5,289.42€
Currencies
Shipping information
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search

Export this product info to :   Printer Friendly   Export to Excel   Export to Word   Export to xml   Export to csv