Linear Motion Bearing

Categories
3D-Printers (Fully Assembled) (2)
Full DIY Kits (6)
DIY Frame Kits (4)
3D Scanner-> (14)
Frames (6)
Printed Parts-> (12)
Spool Holders (5)
Extruder (12)
Hotend-> (43)
Electronics-> (27)
Wiring (11)
Motors (2)
Heated Bed (14)
Mechanical-> (108)
  Bearings-> (43)
    2-Bolt Flanges (1)
    Linear Motion Bearing-> (17)
      LM6UU (4)
      LM8UU (4)
      LMUW8 (1)
      LM10UU (4)
      LM12UU (4)
    Linear Motion Bearing Blocks-> (1)
    Radial Ball Bearing-> (24)
  Hardware (42)
  Motor Couplers (4)
  Pulleys (2)
  Rods (4)
  Springs (3)
  Timing Belt (10)
Filament-> (60)
Supplies (14)
Tools (1)
Crypto Mining (2)
Payment information
Follow Us
1 x Reprap Insulated Copper Wire (Blue) 1-Core Cable (10 m)
1 x Type K Thermocouple (Welded Tip)
1 x USB 2.0 Cable 1.8 m
1 x KISS 200 3D-Printer - Full DIY Kit
1 x Pre-installed Raptor 3D Scanner SD Card - Raspberry Pi 3 Model B
1 x KISS 200 3D-Printer Fully Assembled
1 x Reprap Heater Wire 1 m
1 x Reprap Insulated Copper Wire (Red) 1-Core Cable (10 m)
1 x KISS 200 Extended 3D-Printer Fully Assembled
1 x Reprap Full Wire Cable Set (9 wires)
1 x Reprap Insulated Copper Wire (Green) 1-Core Cable (10 m)
1 x Reprap Insulated Copper Wire Full Set (1-Core) Black, Blue, Red
1 x BITMAIN Antminer S7 S9 D3 l3+ Adapter 120mm Fan to 100mm Duct
1 x Reprap Insulated Copper Wire (Black) 1-Core Cable (10 m)
1 x Reprap 3-Wire Cable | Red, Black & Yellow - 1 m
1 x KISS 200 Extended 3D-Printer - Full DIY Kit
1 x MKS SBASE v1.3 (Smoothieware) 32 Bit 3D Printer Controller
1 x MKS TFT 3.2" Touch Screen Controller Display for 3D Printer
1 x Reprap 2-Wire Cable | Red & Black - 1 m
1 x Reprap 4-Wire Cable | Red, Blue, Green & Black - 1 m
1 x 19 mm Bulldog Clips (4 pieces)
1 x Fireproof Glass plate 4 mm for Heated Print Bed MK2B
1 x BuildTak Printing Surface 254 mm x 254 mm
1 x TESA Blue Painter Tape for PLA - 38 mm / 25 m
2 x BuildTak Printing Surface 203 mm x 203 mm
1 x PCB Heatbed MK2B Dual Power 12/24V - Updated Version of MK2a
1 x Intenso 4 GB microSDHC Card + SD Adapter
2 x High Temperature Resistant PET Tape for ABS/PLA - 50 mm / 66 m
1 x 25 mm Bulldog Clips (4 pieces)
1 x Intenso 8 GB microSDHC Card + SD Adapter
1 x Ø 290 mm Fireproof Glass Plate for Delta / Rostock 3D Printers
1 x BuildTak Printing Surface Diameter 304 mm (Round)
1 x Compression Spring for Reprap Extruder & Heated Bed - 1 piece
1 x Ø 200 mm Fireproof Glass Plate for Delta / Rostock 3D Printers
2 x BuildTak Printing Surface Diameter 203 mm (Round)
1 x Orion Ø 220 mm Round Heated Bed for Delta / Rostock 3D Printer
1 x ONYX (rev6) Ø 310 mm Heated Bed for Delta / Rostock 3D Printers
1 x UHU Glue Stick 40 g
2 x High Temperature Resistant Kapton Tape - 50 mm / 33 m
1 x High Temperature Resistant Kapton Tape - 8 mm / 33 m
5,494.67€
Currencies
Shipping information
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search